Description
Power supply distribution board for direct connection to suit thin 300W enclosed power supplies (eg https://www.aliexpress.com/item/32354845735.html ).
5 way fused power breakout pcb.
Mounts directly to the screw terminals of enclosed power supplies. The screws in the power supply need to be removed to insert board.
The board suits power supplies with at least 3 -V and +V terminals. It cannot be used with power supplies with less.
When looking at the power supply the -V terminals must be to the left of the +V terminals (when the terminals are at your end, not the far end). See image below. For the opposite terminal arrangement use Psdist1.
With power supplies with more than 3 each of -V and +V terminals the 3 of each adjacent to each other must be used. Any ones outside of that can be ignore or wired to as standard.
Features
4 15A (max) 8.25mm terminal outputs. Compatible with spade connectors
1 10A (max) 5mm screw terminal output
Automotive mini fuseholder for each output
Note:- fuses not supplied but can be ordered if required.