Description
String of 20 12V WS2811 pixel modules with 100mm wire length (part of the wire is epoxied within the node). Spacing is approximately 95mm when stretched out.
Each end of the strings have a 3 pin JST connector on them and there is 2 wires free at the end for the purposes of power injection.
The string has double sided tape across the back of it to allow the modules to be affixed to something.
These pixel nodes are 12V. Each pixel will light up the 3 RGB leds per module. Individual leds aren’t addressable.
The pcb within the pixel node is marked with a data direction. Din is “data in” and Dout is “data out”. There is also an arrow on the pcb to denote the data direction.
WS2811 LED Pixel Module, 3pcs 5050 RGB SMD LEDs,DC12V input,20pcs a String,75MM*15MM,Waterproof IP67
Description:
1. WS2811 IC
2. Working Voltage:DC12V input
3. Power:0.72W (3pcs SMD RGB 5050)
4. Size:75*15*4mm
5. 20pcs/string
| Item | Parameter |
| Voltage | DC12V input |
| Power | 0.72W/module |
| Current | 60mA/module |
| Working Temp | -40’C-60’C |
| Lifespan | ≥50000h |
| Viewing Angle | ≥140 |
| IP Grade | IP 67 |
| LED Type | SMD 5050 |
| LED Qty | 3pcs per module |
