Description
This 4 port relay board allows you to turn everything that has a power input like a bubble machine, smoke machine, static lights or to power power supplies as part of your Light show quickly and easily.
With direct xLights integration and full use of The Turnip Network, you can even control a BaldrickSwitchy from one of the buttons on the Baldrick8.
Because there is to possibility of dealing with live power, each BaldrickSwitchy comes in a mountable tray (called the Darwin Tray) to ensure your fingers and metalwork are kept away from anything ‘shocking’.
– 5v – 24v with onboard power management
– 4 Relays which can handle with up to 8amp and 300v (AC/DC) (also works with zero volt/signal circuits)
– DDP, Artnet, E1.31 & SACN compatible
- Small footprint compatible with other Baldrick Boards & smart receiver mounts
- Push from xLights integration
- Controllable via the Turnip Network
– Scannable QR code direct to the docs
Direct integration with xlights versions 2024.14 and later. (Vendor- iLightThat, Model- Switchy)
Conformal coating over the pcb to reduce the chance of damage from condensation or precipitation
QR code on the pcb which links directly to the baldrickboard website
You can read more about the controller here: https://baldrickboard.com
- Power Jack, you can put 5v-24v through a barrel connector (centre positive) and we use 5.5×2.1mm barrel jacks. Please remember you are just powering the board not the devices.
- This is relay 1. Connect your device to to enable control via the BaldrickSwitchy.
- This is relay 2. Connect your device to to enable control via the BaldrickSwitchy.
- This is relay 3. Connect your device to to enable control via the BaldrickSwitchy.
- This is relay 4. Connect your device to to enable control via the BaldrickSwitchy.
- QR Code, an easy to scan QR code which will take you to these docs for quick troubleshooting.
- Ethernet port, to ensure the consistent connection to your devices, we’ve added a 100mb ethernet port to connect to your show network.
- ESP32, the brains of our board, don’t worry about this too much, that’s our job, not yours.
- Our company logo, isn’t it great?.
- Mounting Holes, we’ve designed the BaldrickSwitchy to not only be as compact as possible, we’ve matched the mounting holes to other common controllers so mounts can be reused (in this case the Falcon SRX2 Receiver). DO NOT DRILL out these holes to make them fit the screws you’ve got already, doing this will void any warranty.
